By Category

ARAX CUT5 SLEEVE

Arax® Knit Technology with EN 388 Cut 5 Protection (the highest cut resistance rating in accordance with Australian Standards) protects forearms from cuts and abrasions. EN 388 Level 4 Abrasion Resistance (the highest abrasion resistance rating in accordance with Australian Standards) EN 388 Level 4 Tear Resistance (the highest tear resistance rating in accordance with Australian Standards) Quick and easy donning and doffing Workforce tested and approved Sizes: 35cm length QTY / Pack: 12 Pairs EN 388: 454X  

ARAX DRY GRIP CUT5 LATEX PALM

Black nitrile dip with sand finish absorbs liquids and oils for improved grip when handling oily or greasy parts. Delivering dexterity, durability and grip the Arax® Wet Grip offers the highest level of Cut, Abrasion and Tear resistance in accordance with EN 388 and Australian Standards. If you want a cut resistant glove that performs well across a variety of conditions, the Arax® Wet Grip is your best pick! Best-matched to medium to heavy industries such as automotive and construction applications. Arax® Knit Technology with EN 388 Cut 5 Protection (the highest cut resistance rating in accordance with Australian Standards) EN 388 Level 4 Abrasion Resistance (the highest abrasion resistance rating in accordance with Australian Standards) EN 388 Level 4 Tear Resistance (the highest tear resistance rating in accordance with Australian Standards) EN 388 Level 3 Puncture Resistance Black Nitrile Sand Dip for superior grip in wet, greasy conditions ProChoice's Bare Hand Technology (BHT) for improved dexterity and sensitivity Contact heat resistant to 100ºC Quick and easy donning and doffing Workforce tested and approved Sizes 7, 8 , 9, 10, 11 QTY / Pack: 12 Pairs QTY / Carton: 120 Pairs Approvals: EN 388 4543 / EN 407 X1XXXX  

ARAX HEAVY DUTY CUT5 LEATHER PALM

The Arax Heavy duty features a black nitrile foam dip along with a thick reinforced leather palm that protects your hand from snags on sharp corners and provides a solid grip when handling wet glass or greasy sheet metal. Ideal for glass panel / sheet metal cutting and installation, or any job handling slick, sharp edged materials. Reinforced Synthetic Leather Palm Black Nitrile Foam Dip EN 388 Level 4 Abrasion Resistance (the highest abrasion resistance rating in accordance with Australian Standards) EN 388 Level 4 Tear Resistance (the highest tear resistance rating in accordance with Australian Standards) EN 388 Level 3 Puncture Resistance Black Nitrile Sand Dip for superior grip in wet, greasy conditions Form fitting design that emulate individual hand contour for the most comfortable fit ProChoice's Bare Hand Technology (BHT) for improved dexterity and sensitivity Contact heat resistant to 100ºC Quick and easy donning and doffing Workforce tested and approved Sizes 7, 8 , 9, 10, 11 QTY / Pack: 12 Pairs QTY / Carton: 120 Pairs Approvals: EN 388 4543 / EN 407 X1XXXX Product Code: AFND

ARAX HIVIS CUT5 NITRILE PALM

The black nitrile foam dip makes the Arax® Gold Cut a thinner, more dextrous glove that increases touch sensitivity and moulds to the contours of the hand, minimising hand fatigue. Meanwhile the Arax® Gold Liner provides up to 4 times more blade resistance than the EN388 Cut 5 Rating requires, withstanding over 90 blade rotations during testing (Cut 5 Rating requires <20 rotations). This glove works great for a wide range of medium to heavy duty applications that require advanced protection against mechanical risks. Black Nitrile Foam Dip absorbs oil and grease, and provides excellent dexterity, sensitivity and comfort Arax® Gold Liner with up to 4 times more cut resistance than the EN 388 Cut 5 Protection Standard (the highest cut resistance rating in accordance with Australian Standards) EN 388 Level 4 Abrasion Resistance (the highest abrasion resistance rating in accordance with Australian Standards) EN 388 Level 4 Tear Resistance (the highest tear resistance rating in accordance with Australian Standards) EN 388 Level 3 Puncture Resistance Form fitting design that emulate individual hand contour for the most comfortable fit ProChoice's Bare Hand Technology (BHT) for improved dexterity and sensitivity Contact heat resistant to 100ºC Quick and easy donning and doffing Workforce tested and approved Sizes 7, 8 , 9, 10, 11 QTY / Pack: 12 Pairs EN 388: 4543 EN 407 X1XXXX  

ARAX HIVIS GOLD PU DIP

Hi-Vis Polyurethane (PU) coated palm with anti-static liner Lightweight and breathable Arax liner Excellent dexterity- bare hand technology Form fitting for comfortable all day wear Colour coded cuff for size identification EN 388 4543

ARAX WET GRIP CUT5 NITRILE PALM

Black nitrile dip with sand finish absorbs liquids and oils for improved grip when handling oily or greasy parts. Delivering dexterity, durability and grip the Arax® Wet Grip offers the highest level of Cut, Abrasion and Tear resistance in accordance with EN 388 and Australian Standards. If you want a cut resistant glove that performs well across a variety of conditions, the Arax® Wet Grip is your best pick! Best-matched to medium to heavy industries such as automotive and construction applications. Arax® Knit Technology with EN 388 Cut 5 Protection (the highest cut resistance rating in accordance with Australian Standards) EN 388 Level 4 Abrasion Resistance (the highest abrasion resistance rating in accordance with Australian Standards) EN 388 Level 4 Tear Resistance (the highest tear resistance rating in accordance with Australian Standards) EN 388 Level 3 Puncture Resistance Black Nitrile Sand Dip for superior grip in wet, greasy conditions ProChoice's Bare Hand Technology (BHT) for improved dexterity and sensitivity Contact heat resistant to 100ºC Quick and easy donning and doffing Workforce tested and approved Sizes 7, 8 , 9, 10, 11 QTY / Pack: 12 Pairs QTY / Carton: 120 Pairs Approvals: EN 388 4543 / EN 407 X1XXXX  

BLADE PU OPEN BACK CUT L.5 GLOVE

Product Features Colour: Grey   FDA Approved: Yes   EN388: 4542 Coating: Polyurethane   Carton Qty: 100 Pack Qty: 10  Liner Fabric: HPPE / Fibreglass Unit: Pair   Product Details A specifically designed cut resistant glove for food preparation with HPPE glass fibre yarn and PU coating that meets FDA approvals (refer below). The glove also achieves a high level of EN388 mechanical rating of 4542 achieving full abrasion, cut and tear protection. The liner provides a firm, comfortable fit whilst offering excellent comfort, breathability and dexterity. The glove can be laundered increasing the products usage rate and life.   *FDA REQUIREMENTS All yarns and ingredients used in the production of this glove conform to the applicable FDA indirect food additive regulations as prescribed by the FDA Code of Federal Regulations, Title 21, Part 177 Section 1680 "Polyurethane resins", Part 177 Section 1500 "Nylon", Part 177 Section 1590 "Polyester elastomers" and Part 177 Section 1520 "Olefin Polymers". All lubricants /finishes used in the manufacture of these gloves are food grade and meet or exceed the FDA requirements for direct use with food.

CHAIN EXTRA STAINLESS STEEL MESH GLOVE

Reversible, cut resistant stainless steel. Detachable wrist straps for increased user comfort. Extended cuff and armguard options available.

CUT RESIST TUFFSHIELD GLOVE

Features: Comfortable soft seamless knit design eliminates uncomfortable seams that can rub or chafe. Can be laundered. Will withstand laundry-room caustics up to ph15 and water temperatures up to 80c Sizes XS to XL

KEVLAR GLOVE KNIT 100%

Heavyweight superior protection. Cut resistant. Food, meat, and poultry processing, also glass industry and engineering. One size fits all

KEVLAR KNIT SLEEVE 18″

FEATURES AND BENEFITS 100% Kevlar®. Thumb-slot and Velcro® strap for more comfort. Double layered for greater arm protection. Protects forearms from minor heat, cuts and burns. TECHNICAL SPECIFICATIONS Product description 45cm long double layer Kevlar® cut resistant sleeve. Sleeve material Kevlar®. Care instructions Store in a cool dry area away from direct sunlight. Limitations of use Do not use against flames. Do not use with temperatures < -30°C or > 140°C. Do not use near moving or serrated blades. The sleeves are not puncture resistant. The sleeves are not liquid proof, therefore do not use to protect against chemicals. A full 45cm in length, these double layered sleeves are knitted from 100% Kevlar® fibre and provide cut resistance, flexibility and comfort. GoldKnit sleeves protect forearms from minor burns and heat. They also feature a thumb-slot and a Velcro® strap. IDEAL APPLICATIONS Automotive, Durable goods, Glass industries, Metal stamping

MAXICUT 3OPEN BACK CUT

Product Features Colour: Green/Gray          EN388: 4331 Coating: Foam Nitrile      Pack Qty: 12 Liner Fabric: Dyneema   Unit: Pair Product Details MaxiCut® Designed and developed as a breathable cut resistant glove, MaxiCut® combines cut protection with comfort, flexibility and dexterity for dry environments. 360° breathability - patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today. Innovative fibres - we source our base ingredients to develop our own unique high performance yarns and fibres that offer cut protection whilst maintaining high levels of comfort. Reinforcement - between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area. Form, fit and feel - mimics the “hand at rest”, reducing hand fatigue and increasing comfort. Latest knitting technology - utilized to produce smooth and rounded fingertips, improving fingertip sensitivity. Consistent liner penetration - from the nitrile, leaving only the soft liner resting against the skin. Optimized grip delivered through our micro-cup finish allows for a controlled grip. Our GripTech® “micro-cup” finish enhances grip properties making parts are handled more securely. In addition, it reduces hand fatigue associated with a lack of a proper grip.

MAXIFLEX 34-874 GLOVE BLACK

Product Features Colour: Green/Gray          EN388: 4331 Coating: Foam Nitrile      Pack Qty: 12 Liner Fabric: Dyneema   Unit: Pair Product Details MaxiCut® Designed and developed as a breathable cut resistant glove, MaxiCut® combines cut protection with comfort, flexibility and dexterity for dry environments. 360° breathability - patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today. Innovative fibres - we source our base ingredients to develop our own unique high performance yarns and fibres that offer cut protection whilst maintaining high levels of comfort. Reinforcement - between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area. Form, fit and feel - mimics the “hand at rest”, reducing hand fatigue and increasing comfort. Latest knitting technology - utilized to produce smooth and rounded fingertips, improving fingertip sensitivity. Consistent liner penetration - from the nitrile, leaving only the soft liner resting against the skin. Optimized grip delivered through our micro-cup finish allows for a controlled grip. Our GripTech® “micro-cup” finish enhances grip properties making parts are handled more securely. In addition, it reduces hand fatigue associated with a lack of a proper grip.